Water Meter · Your water, in view

How much water did that shower use?

A compact, battery-powered monitor we’re developing to sit between the shower arm and the showerhead. It measures the water’s flow and temperature, while the shower you already have stays in control.

Begin

Hardware in development

A water bill arrives once a month, for the whole home. Nobody can tell you what this morning’s shower used.

For a household, the Water Meter is a private record of its own showers: how long each ran, how much water it used, how fast and how warm. For an authorized property manager, it’s only totals for a finished day, week or month, and never anyone’s showers.

Where it fits

Between the arm and the head.

In the order you’d expect, with nothing to rewire. Tap the monitor to see what it does.

Where the TrunkFlow monitor fits A side view of a shower: the shower arm comes out of the wall and turns down; the TrunkFlow monitor sits on the arm, and the showerhead screws on below it. Water falls from the showerhead. Shower arm TrunkFlow monitor Flow 6.0 L/min Temp 38.4 °C Showerhead
TrunkFlow monitor

It measures flow and temperature as the water passes through. Turning the water on and off, and how hot it runs, stay with your shower’s own handle.

Conceptual illustration, not an engineering drawing. The numbers beside it come from the sample shower below.

A sample shower

Every shower, in numbers anyone can read.

Drag the slider, or use the arrow keys, to move through one illustrative shower.

Explore a sample shower

Illustrative session
Illustrative session: water used and temperature over 8 minutes The water used rises in a straight line from 0 to 48 litres over 8 minutes. The temperature warms from about 29 to 38 degrees Celsius in the first minute, then holds near 38. 01020304050 2530354045 012345678 Minutes Litres °C
  • Water used so far (litres)
  • Temperature (°C)
Time
4:00min
Water used
24L
Flow
6.0L/min
Temperature
38.4°C

The same session in words: eight active minutes at a constant 6 L/min, 48 L in all. At minute 4 it has used 24 L. The water warms from about 29 °C to 38 °C in the first minute, then holds between 37.9 and 38.5 °C. Nothing pauses, so the time the shower ran and the time water flowed are both 8 minutes; when a shower does pause, the software counts the two separately.

Who sees what

The same water. Two very different screens.

Switch between a resident and a property manager. The difference is the point.

Fictional data

A resident sees their own showers.

Each shower is its own private record, kept for as long as the household chooses.

  • Duration, total water, flow and temperature
  • A temperature trace for each shower
  • History kept from 30 days to forever, their choice

A property manager sees totals, not showers.

An authorized manager gets totals for completed days, weeks or months, by device or location. The software doesn’t give them individual showers, times or temperatures, and the database enforces that, not just the screen.

  • Reports for finished periods only
  • Totals by unit, device or location, and combined
  • No access to a resident’s shower history

The light and the chirps

No screen on the device.

A small light and a few chirps say what’s needed, and the phone shows the rest. Both are design goals.

The temperature light

Design goal

Green: within your range

The water is inside the range you picked.

You choose the range in the app. Blue means the water is below it, green within it, red above it, and the app always says so in words too.

Setup chirps

Planned
  • Batteries inA couple of short chirps.
  • Pairing with a phoneA longer chirp, repeated a few times.
  • Set upOne short, upbeat chirp.

The sounds here play quietly, and only when you press Play.

Where it stands

Software working. Hardware in development.

Hardware in development. Temperature-probe bench testing and companion software are documented. Flow calibration and testing of the assembled meter remain ahead.

Working today

  • The companion software: private shower records for households and period totals for property managers, each role’s limits enforced by the database
  • Bench tests of the temperature probe, documented

Still ahead

  • Calibrating the flow measurement
  • Testing the assembled meter

The light, the chirps and the two-battery design are design goals. Until the assembled meter has been tested, we make no claims about its accuracy, battery life or savings.

Visit the companion app

app.trunkflowtech.com, in development. An account sees data only after TrunkFlow grants it access to a property.